PRO-2036 200-Channel - Limit Search

PRO-2036 200-Channel - Limit Search
(200-0412)

Operation
Limit Search

1.  If ENTER LOCK is on, set it to OFF.

2.  If SCAN is displayed or the scanner is scanning, press MANUAL.

3.  If the LOCK indicator is on, press LOCK.  The scanner beeps softly
    and LOCK turns off.

4.  Press FREQ/CHAN until the CHAN indicator turns on.  The scanner beeps
    softly.



5.  Turn the rotary tuner until the display shows the channel into which
    you want to store a frequency.

6.  Use the number keys to enter the lower limit of the frequency range
    you want to search, then press LIMIT V-bar.  The displayed channel
    flashes.

7.  Use the number keys to enter the upper limit of the frequency range
    you want to search, then press LIMIT V-bar.

8.  Press SEARCH to search from the lower to the upper limit.

9.  To store the displayed frequency in the selected channel, press E.
    The displayed channel stops flashing and the scanner stores the
    frequency.

10. After you store a frequency, repeat Step 5 to select another channel
    to store a frequency in.  Then repeat Step 8.

11. When you finish storing the frequencies, set ENTER LOCK to ON to
    prevent accidentally changing them.

PRIORITY Programming

Priority feature allows you to scan through programmed channels and not
miss an important or specified call on a specific channel.  There are 10
storage banks and each bank can have one channel as a priority channel
Only one stored channel in each bank can be programmed as a priority
channel.

1.  If SCAN is displayed or the scanner is scanning, press MANUAL.

2.  If the LOCK indicator is on, press LOCK.  Lock turns off.

3.  Press FREQ/CHAN until the CHAN indicator turns on.  The scanner beeps
    softly.

4.  Press the rotary tuner until the display shows the channel you want to
    designate as priority channel.

5.  Press and hold down PRIORITY until P appears on the display to the
    left of the channel number.



NOTE:  The scanner displays PCH LOC. OUT if only one bank is turned on and
       the current priority channel in the bank is empty.  The scanner
       still designates the channels selected as the new priority channel.

To turn on the priority feature, press PRIORITY.  The scanner checks each
priority channel from lowest to highest every two seconds and stays on the
channel if there is activity.  PRIORITY appears above the frequency.

To turn off the priority feature, press PRIORITY.  PRIORITY disappears
from the display.

Amateur Radio Users Support Group
https://groups.io/g/AmateurRadio 


North America - USA 🇺🇸 / Canada 🇨🇦 Amateur Frequencies
A shared discussion about North America Frequencies.
https://groups.io/g/Frequency


Radio Scanners
https://groups.io/g/Scanners
Whistler Scanners [Whistler, Uniden]